SEARCH NOW FOR ALL YOUR HARVEY TOOL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Cutting HSS & Solid Carbide / End Mill
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
HARVEY TOOL
13993
SQUARE END MILL: 3/32" DIA, 0.139" LOC, 2 FLUTES, SOLID CARBIDE
£13.50
Price with VAT:
£16.20
HARVEY TOOL
14017-C3
SQUARE END MILL: 0.0170" DIA, 0.026" LOC, 0.125" SHANK DIA, 1.5" OAL, 4 FLUTES, SOLID CARBIDE
£22.50
Price with VAT:
£26.99
HARVEY TOOL
14047-C3
SQUARE END MILL: 3/64'' DIA, 0.07'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 4 FLUTES, SOLID CARBIDE
£18.75
Price with VAT:
£22.50
HARVEY TOOL
14052
SQUARE END MILL: 0.052" DIA, 5/64" LOC, 4 FLUTES, SOLID CARBIDE
£15.75
Price with VAT:
£18.90
HARVEY TOOL
14062-C4
SQUARE END MILL: 0.0625" DIA, 0.093" LOC, 0.125" SHANK DIA, 1.5" OAL, 4 FLUTES, SOLID CARBIDE
£22.50
Price with VAT:
£26.99
HARVEY TOOL
14078
SQUARE END MILL: 5/64" DIA, 0.1170" LOC, 4 FLUTE, SOLID CARBIDE
£13.50
Price with VAT:
£16.20
HARVEY TOOL
14088
SQUARE END MILL: 0.0880" DIA, 0.132" LOC, 4 FLUTE, SOLID CARBIDE
£13.50
Price with VAT:
£16.20
HARVEY TOOL
33650
SQUARE END MILL: 0.05" DIA, 0.4" LOC, 3 FLUTES, SOLID CARBIDE
£44.24
Price with VAT:
£53.09
HARVEY TOOL
33650-C3
SQUARE END MILL: 0.05" DIA, 0.4" LOC, 3 FLUTES, SOLID CARBIDE
£47.99
Price with VAT:
£57.59
HARVEY TOOL
33678
SQUARE END MILL: 5/64'' DIA, 5/8'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE
£22.50
Price with VAT:
£26.99
HARVEY TOOL
33714-C3
SQUARE END MILL: 7/32" DIA, 1-3/4" LOC, 4 FLUTES, SOLID CARBIDE
£35.24
Price with VAT:
£42.29
HARVEY TOOL
33716
SQUARE END MILL: 1/4" DIA, 2" LOC, 4 FLUTES, SOLID CARBIDE
£40.49
Price with VAT:
£48.59
HARVEY TOOL
34078-C3
BALL END MILL: 5/64" DIA, 5/8" LOC, 3 FLUTE, SOLID CARBIDE
£30.74
Price with VAT:
£36.89
HARVEY TOOL
34108-C3
BALL END MILL: 0.125" DIA, 1" LOC, 3 FLUTE, SOLID CARBIDE
£28.49
Price with VAT:
£34.19
HARVEY TOOL
34608
SQUARE END MILL: 0.2 MM DIA, 0.3 MM LOC, 3 FLUTES, SOLID CARBIDE
£38.99
Price with VAT:
£46.79
HARVEY TOOL
34610-C4
SQUARE END MILL: 0.0100" DIA, 0.0150" LOC, 3 FLUTE, SOLID CARBIDE
£49.49
Price with VAT:
£59.39
HARVEY TOOL
34620
SQUARE END MILL: 1/64'' DIA, 1/32'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE
£29.99
Price with VAT:
£35.99
HARVEY TOOL
34622
SQUARE END MILL: 0.022'' DIA, 0.033'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£26.99
Price with VAT:
£32.39
HARVEY TOOL
34625-C3
SQUARE END MILL: 0.025" DIA, 0.038" LOC, 3 FLUTES, SOLID CARBIDE
£32.99
Price with VAT:
£39.59
HARVEY TOOL
34626
SQUARE END MILL: 0.026'' DIA, 0.039'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE (MOQ=1, PKG QTY=1)
£24.74
Price with VAT:
£29.69
HARVEY TOOL
34631
SQUARE END MILL: 1/32'' DIA, 3/64'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE
£29.24
Price with VAT:
£35.09
HARVEY TOOL
34631-C3
SQUARE END MILL: 1/32'' DIA, 3/64'' LOC, 1/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE
£32.99
Price with VAT:
£39.59
HARVEY TOOL
34700
SQUARE END MILL: 0.1" DIA, 0.15" LOC, 3 FLUTES, SOLID CARBIDE
£28.49
Price with VAT:
£34.19
HARVEY TOOL
34702
SQUARE END MILL: 7/64" DIA, 0.164" LOC, 3 FLUTES, SOLID CARBIDE
£28.49
Price with VAT:
£34.19
HARVEY TOOL
34705
SQUARE END MILL: 3 MM DIA, 4.5 MM LOC, 3 FLUTES, SOLID CARBIDE
£28.49
Price with VAT:
£34.19
HARVEY TOOL
12216
CORNER RADIUS END MILL: 1/4" DIA, 1/4" LOC, 0.03" RADIUS, 2 FLUTES, BRAZED SOLID CARBIDE
£263.20
Price with VAT:
£315.83
HARVEY TOOL
12720-C4
SQUARE END MILL: 0.50 MM DIA, 0.1000" LOC, 3 FLUTE, SOLID CARBIDE
£35.24
Price with VAT:
£42.29
HARVEY TOOL
12735-C4
SQUARE END MILL: 0.0350" DIA, 0.175" LOC, 0.125" SHANK DIA, 2.5" OAL, 3 FLUTES, SOLID CARBIDE
£32.99
Price with VAT:
£39.59
HARVEY TOOL
34708
SQUARE END MILL: 1/8" DIA, 3/16" LOC, 3 FLUTES, SOLID CARBIDE
£28.49
Price with VAT:
£34.19
HARVEY TOOL
14620-C4
SQUARE END MILL: 5/16" DIA, 5/8" LOC, 2 FLUTES, SOLID CARBIDE
£70.49
Price with VAT:
£84.58
HARVEY TOOL
14920-C3
BALL END MILL: 5/16" DIA, 15/32" LOC, 4 FLUTE, SOLID CARBIDE 6" OAL, 5/16" SHANK DIA, 30 DEG HELIX, ALTIN COATED, SINGLE END, SERIES MINIATURE END MILLS - BALL - EXTRA LONG LENGTH, MINIATURE ...
£87.73
Price with VAT:
£105.28
HARVEY TOOL
17060-C3
CORNER ROUNDING END MILL: 0.06 MM RADIUS, 3/16" DIA, 2 FLUTES, SOLID CARBIDE
£49.49
Price with VAT:
£59.39
HARVEY TOOL
17070-C3
CORNER ROUNDING END MILL: 0.07 MM RADIUS, 3/16" DIA, 2 FLUTES, SOLID CARBIDE 2" OAL, 3/16" SHANK DIA, ALTIN COATED, DOUBLE END (MOQ=1, PKG QTY=1)
£41.24
Price with VAT:
£49.49
HARVEY TOOL
17093-C3
CORNER ROUNDING END MILL: 3/32" RADIUS, 1/4" DIA, 2 FLUTES, SOLID CARBIDE
£57.74
Price with VAT:
£69.29
HARVEY TOOL
17100-C3
CORNER ROUNDING END MILL: 0.10 MM RADIUS, 1/4" DIA, 2 FLUTES, SOLID CARBIDE
£57.74
Price with VAT:
£69.29
HARVEY TOOL
17808
BALL END MILL: 1/8" DIA, 0.1880" LOC, 2 FLUTE, SOLID CARBIDE
£53.99
Price with VAT:
£64.79
HARVEY TOOL
20960
TAPERED END MILL: 3 DEG ANGLE PER SIDE, 0.0600" SMALL DIA, 0.6000" LOC, 3 FLUTE, SOLID CARBIDE, SQUARE END
£49.49
Price with VAT:
£59.39
HARVEY TOOL
22816-C3
1/4" DIAM 220° WRAP ANGLE 0.168" LOC 4-FLUTE ALTIN FINISH UNDERCUT END MILL 1/4" SHANK DIAM, 2-1/2" OAL, 1/8" RADIUS, SOLID CARBIDE (MOQ=1, PKG QTY=1)
£46.49
Price with VAT:
£55.79
HARVEY TOOL
23104-C3
BALL END MILL: 0.0625" DIA, 0.053" LOC, 2 FLUTE, SOLID CARBIDE
£35.99
Price with VAT:
£43.19
HARVEY TOOL
23205-C3
5/64" DIAM 270° WRAP ANGLE 1.7MM LOC 2-FLUTE ALTIN FINISH UNDERCUT END MILL
£38.24
Price with VAT:
£45.89
HARVEY TOOL
24020-C3
CORNER RADIUS END MILL: 5/16" DIA, 30 DEG HELIX, CORNER RADIUS END, CENTERCUTTING SERIES MINIATURE END MILLS - CORNER RADIUS - EXTRA LONG LENGTH & MINIATURE END MILLS
£92.23
Price with VAT:
£110.68
HARVEY TOOL
24032
CORNER RADIUS END MILL: 1/2" DIA, 3/4" LOC, 0.0300" RADIUS, 4 FLUTE, SOLID CARBIDE
£159.72
Price with VAT:
£191.66
HARVEY TOOL
24162-C8
SQUARE END MILL: 0.0625" DIA, 0.186" LOC, 0.125" SHANK DIA, 1.5" OAL, 2 FLUTES, SOLID CARBIDE
£21.75
Price with VAT:
£26.09
HARVEY TOOL
24378-C6
SQUARE END MILL: 5/64'' DIA, 15/64'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 5 FLUTES, SOLID CARBIDE
£27.74
Price with VAT:
£33.29
HARVEY TOOL
24408-C6
SQUARE END MILL: 1/8" DIA, 1/2" LOC, 5 FLUTES, SOLID CARBIDE
£24.00
Price with VAT:
£28.79
HARVEY TOOL
24410-C6
SQUARE END MILL: 5/32" DIA, 9/16" LOC, 5 FLUTES, SOLID CARBIDE
£30.74
Price with VAT:
£36.89
HARVEY TOOL
24547
BALL END MILL: 3/64" DIA, 0.0700" LOC, 2 FLUTE, SOLID CARBIDE
£19.50
Price with VAT:
£23.40
HARVEY TOOL
24612-C3
BALL END MILL: 0.30 MM DIA, 0.0180" LOC, 4 FLUTE, SOLID CARBIDE 1-1/2" OAL, 1/8" SHANK DIA, 30 DEG HELIX, ALTIN COATED, SINGLE END, SERIES MINIATURE END MILLS - BALL - STUB & STANDARD, MINIA ...
£30.74
Price with VAT:
£36.89